1.07mm ID Etched PTFE (18 AWG Bondable PTFE ) Pushrod Outer Tube

Low friction 1.07 mm ID PTFE tube suitable for pushrod outers on discus launched glider and other small models. Also suitable for a large range of engineering and industrial uses.

This tubing is specially etched on the outside, making it easily bondable using many adhesives, thin CA being probably the best. Provides the lightest, easiest, most friction-free pushrod installations possible.

Can be stretched to 2 times the original length to reduce the weight per meter, and tune the inside diameter to be a perfect fit for the inner pushrod. Sold by the meter. Enter a quantity of 3 for a 3m roll.

18L Etched PTFE Tube Specification
Inside diameter	1.07 mm	0.042 in
Wall thickness	0.16 mm	0.006 in
Outside diameter	1.4 mm	0.055 in
3X Stretched ID	0.64 mm	0.025 in
Suggested inner	0.8mm Carbon Rod	22 SWG or thinner Piano or SS wire
US size	18 AWG L type (Lightweight)
Weight per m	1.4 g per meter

Maximum 30m per order please. For more please consider purchasing a complete roll.